The 5000335 and 5001442 mobile-type Rope Grabs are designed to allow maximum freedom of movement. When properly installed, the mobile rope grab automatically follows the worker, hands-free.

The Trailing Rope Grab provides complete hands-free mobility by automatically moving up and down a vertical lifeline without the need to pause for manual adjustments.

Use the lightweight Microloc Trailing Rope Grab to move easily and safely through your work area with greater comfort and less restriction.

This fall arrest device is easy to use and can be installed on or removed from any point on the rope.

The Non-Trailing Rope Grab features a built-in D-Ring for attaching locking snap hooks from any Miller lanyard.

Provide workers with needed fall protection anchorage while they work on flat or sloped roofs.

The Standing Seam Roof Anchor is designed to provide an anchorage point on a flat or sloped structural standing seam roof, without the risk of damaging or puncturing the rooftop.

The rugged all-steel construction of the Permanent Roof Anchor creates an anchorage point that lasts as long as the roof it is attached to.

Keep workers safe from falling while they work at heights during bridgework, construction, manufacturing, and maintenance with the Sayfline Synthetic Horizontal Lifeline System.

Temporary horizontal lifeline system installs and removes quickly and easily. Ideal for use at temporary job sites. The Dyna-Line System is built with special features:

Terminate rope without having to tie intricate, hard-to-remove knots.

The Heavy-Duty Self-Retracting Lifeline is lightweight but tough, with a cast aluminum housing that resists dents and damage, and a high-strength pivoting steel anchorage shackle.

The Ultra-Lok Self-Retracting Lifeline features a durable, glass-filled polyurethane housing with aluminum sideplates. It contains a 1''-wide nylon web lifeline. The lifeline extends and retracts, allowing the worker to move with ease in his work area

Offering the maximum in durable, reliable fall protection, the Ultra-Lok Self-Retracting Lifeline features 3/16” wire rope cable with a glass-filled polyurethane or aluminum housing and stainless steel working components.

The lightweight and compact Titan™ Retractable Lifelines are designed in 20, 30, 50, and 65’ lengths.

The Miller Black Rhino is one of the most compact and lightweight 9’ self-retracting lifelines available. It is ideal for a variety of concrete construction, welding, steel erection and warehouse applications.

A high-impact nylon housing makes the Falcon Self-Retracting Lifeline both lightweight and nearly indestructible. The internal components are constructed from corrosion-resistant stainless steel and aluminum which increases the lifespan of the Falcon.

The Miller Scorpion Personal Fall Limiter is an economical and effective alternative to shock-absorbing lanyards.

The Short-Stop Self-Retracting Lanyard is ideal for climbing applications where vertical mobility is needed.

The Dyna-Lock Self-Retracting Lanyard is a fast-acting fall arrester that limits total fall distance and fall arrest forces while allowing user freedom of movement.

The Aptura LT Self-Retracting Lanyard (SRL) has an extensive range of features which make it one of the most comprehensive SRL’s on the market.

Restraint Lanyards are primarily used for travel restriction and work positioning.

The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

Rebar Restraint Lanyard Assemblies meet the fall protection needs of those working on wall forms and concrete construction. They fasten securely to anchorage points existing on rebar and other framework.

The tie-back model EZ Stop II eliminates the need for a separate anchorage connector. All EZ Stop II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

The EZ Stop II Lanyard utilizes a tearing action in the shock-absorbing pack to keep the fall arresting forces under 900 lbs.

EZ Stop® II shock absorbing lanyards are designed for versatility and are available in many variations including this tie-back model that eliminates the need for a separate anchorage connector. All EZ Stop® II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

The rugged FP5K carabiner gives the FP5K Tie-Back Shock-Absorbing Lanyard extreme strength.

The elastic design of the FP Diamond Expanyard allows it to contract, which greatly reduces trip and snag hazards.

The FP Diamond Shock-Absorbing Lanyard features a strong durable sheath with a highly visible deployment tag.

The shock-absorbing Expanyard Dyna-Brake Lanyard is designed to stretch up to 6’ in length.

The Manyard II contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

The strong, safe BackBiter Lanyard is specifically designed for tying back at any angle.

The 6’ Titan™ Shock-Absorbing Lanyard is constructed of lightweight, durable webbing with locking snap hook or rebar anchorage harness connections.

The Titan T-BAK Lanyard is a pack-type shock-absorbing lanyard designed for tie-back use.

The Manyard Lanyard contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The StretchStop Lanyard stretches from 4 to 6', offering excellent worker mobility.

The D-Ring Extension allows workers to quickly and easily hook up the harness without stretching in an uncomfortable manner to reach the D-ring.

The state-of-the-art Revolution Harness is the ultimate in modern design and functionality, and has several features which make it stand out among other full-body harnesses.

The Standard Vest-Style Harness is one of the Delta No-Tangle™ full body harnesses. Durable and lightweight, it has color-coded straps that hold their shape, making donning easy.

The Delta No-Tangle™ design provides a high level of comfort comfort and easy donning. It also features a spring-loaded stand-up back D-ring which ensures fast, easy, and safe connections.

This Full Body Harness, complete with back D-ring, is durable and lightweight and allows maximum mobility while providing superior protection against falls. Delta No-Tangle™ design for added comfort and easy donning.

The state-of-the-art Revolution Harness is the ultimate in modern design and functionality, and has several features which make it stand out among other full-body harnesses.

The state-of-the-art Revolution Harness is the ultimate in modern design and functionality, and has several features which make it stand out among other full-body harnesses.

A cushioned tubular webbing in the shoulder straps of the DuraFlex Python Ultra Harness creates an extra measure of comfort for the wearer.